July 23, 2019 - Taipei, Taiwan - GlacialPower, the power division of the LED technology manufacturer GlacialTech Inc, announces the GP-CVM200P constant voltage LED driver series, including non-dimming, 3-in-1 dimming and DALI versions. It rated power output of 200W is available in 12V, 24V, 36V and 48V models. At full load these new drivers provide an outstanding active power factor correction which greater than 0.98 at 115Vac, and more than 0.94 at 230Vac. The GP-CVM200P delivers the excellent power efficiency from 92% to 94% and has a very low no load consumption under 0.5 watt at 230Vac.
The advanced features of GP-CVM200P product family include high efficiency, silent operation and light weight. This series offer the CV of 12V, 24V, 36V and 48V models. GP-CVM200P-xxV is non-dimming, GP-CVM200P-xxVA supports 3-in-1 dimming, and GP-CVM200P-xxVD supports DALI functions. The GP-CVM200P series can cover most of market demands especially for high power requirement of LED strip and light box markets.
The GP-CVM200P series feature a fully isolated metal housing with aluminum material; it comes in an IP67-rated dust and waterproof enclosure suitable for outdoor as well as indoor use. The output and dimming lines are totally compliant with the new regulations with isolation to ensure the safety during installation. The new series include the over current protection (OCP), short circuit protection (SCP), over temperature protection (OTP) and over voltage protection (OVP). These features protect the LED driver and lighting fixture to ensure a long lifespan.
|Ripple & Noise (Max.)
|Efficiency at 230VAC (Typ.)
|PWM Dimming (optional)
||> 1700 Hz (for dimmable version)
|Set up time (Max.)
||0.5s / 230VAC, 1s / 115VAC, at full load.
||100 ~ 277VAC
||90 ~ 305VAC
||47 Hz ~ 63 Hz
|AC Current (Max.)
||2.5A at 115VAC / 1.2A at 230VAC
||> 0.98 at 115VAC / >0.94 at 230VAC at full load. PF≧0.9 at 70% load
|Total Harmonic Distortion
||THD < 15% at 230VAC, full load.
|Inrush Current (Typ.)
||Cold Start 70A at 230VAC
||< 1mA / 240VAC
||Puls:Hi=10V Low=0V, Duty:0%~100%, Fsw 0.5‐3KHz
||0KΩ~100KΩ or Electronic Potentiometer 0‐10V
||Compatibility with IEC 62386-101, 102 and 207
|DALI bus current
||105~180% rated current.
Type: Auto recover after fault condition disappeared.
||Type: Hiccup mode & recovers after fault condition disappeared.
|Type: Hiccup mode (re-power on to recover).
||Tcase : 95°C ± 10°C
|Type: Shutdown mode (re-power on to recover).
||120K hours min. MIL-HDBK-217F(25°C)
|Dimension (L x W x H)
||203.2 x 80.3 x 33.5 mm; 840g/pcs